We all know that the arrival of summer has a certain impact on some products. For example, our steel structure workshop is also the same. It will be faced with the need to cool down. So, in summer, the steel structure workshop will realize ventilation and cooling through ventilators?

   Although for the steel structure building, the steel has good thermal conductivity, the heat conduction of the roof in summer is very much, which makes the internal air stuffy and intolerable, and can lead to heatstroke of indoor staff seriously.The construction of steel structure workshop needs to do a good job of ventilation, cooling treatment, to ensure the health of internal personnel.

   In order to achieve good ventilation of steel structure workshop, the owners usually choose to install roof ventilator to promote the air circulation flow of industrial workshop.The roof ventilator should be selected according to the ventilation and lighting requirements of the building, and the specification and model of the roof ventilator should be determined according to the local climate conditions, the dominant wind direction, the height of the building, the temperature difference between the inlet and the exhaust air, and the ventilation rate.

   Ventilators are suitable for non seismic areas and seismic areas with seismic fortification intensity less than or equal to 7 degrees. If they can not meet the requirements, they need to negotiate with the ventilator manufacturer and design and manufacture them separately.Structural waterproofing technology is adopted to ensure that there is no water leakage in the joints of roof ventilator and roof flashing joints.

   If it is windy or snowy in winter, the wind resistance pressure and snow load value of the ventilator should be considered, and the ventilator manufacturer can be consulted.In fact, the selection of roof ventilator suitable for steel structure workshop also needs to be selected according to the actual production requirements of the workshop.Different plants need different ventilation times per hour.In general, the ventilation rate per hour is very high in the workshop of general building type and high heat workshop.

  The selection of appropriate roof ventilator can effectively carry out ventilation and cooling treatment to ensure that the internal air of steel structure workshop can be smooth, and the staff will not suffer heatstroke due to high temperature.Select a professional engineering company for plant planning and installation, eliminating the need for later processing.

  The above is the small series to explain to you the arrival of summer, steel structure workshop ventilation cooling through ventilators, I hope to help you.If you want to know more about steel structure workshop, please contact us.