News

  • How to prevent moisture in movable steel structure board house

    How to prevent moisture in movable steel structure board house

    How can the movable steel structure plank house do the moisture proof work better?     1.Take up the glass wool and install the wall color steel plate;     2.Facing the indoor side, the veneer is rolled from the eaves to the wall corner, and the double-sided tape is used to fix the glass fel...
    Read more
  • Key points of steel structure installation

    Key points of steel structure installation

    What are the key points of steel structure installation?     (1) Friction coefficient: F is the force that causes the initial sliding of the test piece measured by the anti sliding test, NF is the number of friction surfaces, and is the sum of the measured values of the tightening pretension o...
    Read more
  • What problems should be avoided in the welding of steel truss floor bearing plate

    What problems should be avoided in the welding of steel truss floor bearing plate

     If people want to make the steel truss floor support plate fully ensure the welding effect when welding, then in the welding process, they need to pay more attention to the details, so what problems should be avoided as far as possible, the following is a brief introduction to floor support pla...
    Read more
  • What are the functions of rock wool steel structure sandwich board in the construction industry

    What are the functions of rock wool steel structure sandwich board in the construction industry

    Rock wool steel structure sandwich panel is a kind of intermediate inclusion with certain strength, which is made of rock wool after mechanical processing and high temperature curing treatment. Two sides of the sandwich panel are added with a single layer of color steel plate.Rock wool insulatio...
    Read more
  • Advantages of floor bearing plate and its specifications

    Advantages of floor bearing plate and its specifications

    Compared with other construction, floor bearing plate has advantages in use, design, construction and comprehensive economy, with low cost and can be moved at any time.   1、 Compared with the traditional buildings, the floor supported residential buildings can better meet the requirements of fl...
    Read more
  • Color steel fire safety is very important

    Color steel fire safety is very important

    Color steel plate is the most common mobile room material, which can be seen in many construction sites.Although the color steel plate is easy to use, inspectors found that flammable polystyrene foam was wrapped inside the color steel plate when inspecting its internal material.The inspector too...
    Read more
  • There is a unique way to judge the quality of color steel plate

    There is a unique way to judge the quality of color steel plate

    In recent years, with the development of color steel house industry, the demand of color steel house material color steel plate is also increasing.Color steel plate is a kind of very thin steel plate with organic color coating.Most of them are used for the wall panel and roof panel of the mobile...
    Read more
  • Introduction to seismic performance of steel structure engineering

    Introduction to seismic performance of steel structure engineering

    Steel structure construction is light in weight, high in strength, good in overall rigidity and strong in deformation.The self weight of the building is only one fifth of the brick and concrete structure, which can withstand the hurricane of 70 meters per second, so that the wealth of life can b...
    Read more
  • Inspection of installation and setting out of steel structure floor bearing plate

    Inspection of installation and setting out of steel structure floor bearing plate

    The installation and setting out of the steel structure floor support plate need to check the size first.We know that the installation process of steel structure floor bearing plate is not simple laying, but a more rigorous process, such as detailed design first.     1.Firstly, check the insta...
    Read more
  • Bottlenecks in structural design

    Common problems in steel structure design:     1.The middle column of multi span portal frame is designed as swing column, but in the actual project, the middle column and inclined beam are welded dead, resulting in the calculation diagram inconsistent with the actual structure, resulting in e...
    Read more
  • Treatment of steel structure surface polishing

    The steel structure internal burr is all moved to the internal welding scar device by the on-line straight seam welded pipe production line.General water or sediment wear, short straight words, you can choose wire cutting.Taiyuan Steel Structure mirror polishing method is used for the first grin...
    Read more
  • Advantages of color steel composite board

    What are the advantages of color steel composite board?     1.The color steel composite plate is light, about 10kg~14kg / m2, equivalent to 1/30 of the brick wall;     2.The color steel composite board has good heat insulation, suction and sealing performance;     3. the color steel compos...
    Read more