No matter what is installed, it is very important in the process of installation, because the installation will directly affect the later use effect and product quality, especially the building materials. If some matters are not done well in the process of installation, there will be some problems in the later use process. So today’s editor will take you to know about the safety of the products.What should be paid attention to in the process of installation?

steel structure

1.Before the installation of steel structure, all components shall be comprehensively inspected, such as whether the number, length, perpendicularity of components and the size between bolt holes at the installation node meet the design requirements; the defects in the production and deformation during transportation shall be corrected on the ground and properly solved.

2.The steel column and foundation are generally connected by embedded anchor bolts. Therefore, before installing the steel column, the size of the foundation bolts, the length of the exposed foundation surface, the elevation of the top surface of the foundation meet the design requirements, and whether the thread of the anchor bolt at the foot of the column is damaged, etc. (generally, measures should be taken to protect the anchor bolt and its thread at the foot of the column from being damaged).

3.During the hoisting of steel structure, proper measures shall be taken to prevent excessive bending and torsion deformation. Meanwhile, cushion block shall be added at the contact part between the rope buckle and the component to prevent the component from being scratched.

4.After the steel structure is hoisted in place, the support and other connecting components shall be fastened in time to ensure the stability of the structure.

5.The hoisting of all the superstructure must be carried out after the substructure is in place, calibrated and fastened with supporting members.

6.According to the lifting capacity of the construction site installation machinery, large installation units are assembled on the ground to reduce the workload of high-altitude operation.

   The above points are the matters needing attention in the process of installation. Today, I will talk about it first. If you want to know more information, please visit our website for details.